Products Featured in this Video
Hey everyone, it's Evangeline here at etrailer and if you are ready to get your red, white and blue on your car, well, here we have the Scrub Blade windshield wipers. These come in different color options, so if you want to maybe get patriotic with it and get some customized colors for your vehicle, this is what we'll take a look at. While wiper blades are a necessity, they can also be fancy, so… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Curt #C93FV is intended for vehicles without LED taillights. If you have LED lights on your 2023 Kia Telluride you will need the Curt #C59236 instead. I understand you would rather have a plug an play installation, but this is the only wiring…
view full answer...I attached a picture that shows what the three different styles of wiper blades look like. Beam and Frame are the most different and Hybrid is mix of the two. The #MCH8519 is the hybrid style in the middle.
view full answer...I went out to our warehouse and got the following dimensions for the Stabilizer Jacks #TJ01RT-HD in the stowed position. I have included an image below so you can see the points I measured from. The overall length is 12-3/8" long,…
view full answer...I did a little digging on your grease seal number and it looks like the 16074-224 has an inner diameter of 1.5 inches and an outer diameter of 1.987 so the correct part number you would need is the #10-9.
view full answer...Yes, the Wiper Technologies Heavy Duty Windshield Wiper Blade - Beam Style - 36" - Qty 1, part #WPR66FR, will attach via a j-hook. It comes with an adapter that makes it compatible with a j-hook style wiper. I have included an installation…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...The Dexter Electric Trailer Brake Kit #23-105-106 will definitely work as a replacement for your AxleTek Trailer Brakes B12E-22 (right) and B12E-21 (left), our part number #AKEBRK-6. Both of these are 12" x 2" brakes and have the…
view full answer...Since we can see that your hitch is a Curt based on the sticker we know that the hitch you have for your 2006 Nissan Xterra is the #13514 which you can order replacement hardware for with part #RHK. You'd need to select Curt from the drop…
view full answer...As long as the exhaust is located in the stock position, you do not have to remove any exhaust components. To allow easier access to the mounting location, the rubber isolators that the muffler hangs from will need to be temporarily removed from…
view full answer...Some couplers have an adjustable tension against the hitch ball from the trigger latch system. I recommend looking into that first as it will help keep the ball tighter within the connection. The lightweight trailer actually works against you on…
view full answer...The Rear View Safety Backup Camera System #RVS-062710 is a pretty much closed system with each component having a connector to connect to the wiring instead of splicing. Most likely the camera that isn't working has a loose connection so…
view full answer...Thanks for getting me the coupler and hitch height of your setup. Based on that you'd need a 6 inch drop ball mount. So for a 2 inch ball mount that has the correct amount of drop you'd want the #C45064 which comes with a 2 inch hitch…
view full answer...